Installation Instructions :
✔Before installing the stable pads, make sure that your machine is at the right level on a flat surface.
✔Clean the floor and it is necessary to thoroughly clean the feet of possible traces of rust, and if irregularities occur, remove them. Make sure the pads are clean.
✔Place the pads next to the machine feet.
✔Alternately, tilt the machine on each side while another person install the pad under the machine in the place where its feet come into contact with the floor. (Be careful! Don’t lower the machine without warning another person).
✔Make sure that the machine feet are in the groove of the pads.
✔If all the pads are set correctly, then your machine is ready and you can enjoy the silence, while it works.