Ultra Durable WH02X10383 Washer Tub Seal Replacement Part by Blue Stars – Exact Fit For GE & Hotpoint Washers - Replaces WH02X10032 WH02X1196 PS4704237
? ???% ???????? ????????: Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or FULL refund, no questions asked. Buy with confidence!
✅ MODEL NUMBER: WH02X10383 Washer Tub Seal.
✅ HIGH COMPATIBILITY: It is made exactly fit for most top name brands (General Electric, Hotpoint) and replaces part numbers: WH02X10032, WH02X1196, WH2X1196, PS4704237.
✅ SAVE TIME AND SAVE MONEY: Inexpensive way to fix or repair a washer. You can check if the tub seal needs to be replaced by watching that area during an actual fill cycle. Take off the front panel, or if it is a front-loading washer, the rear panel. Without touching the washing machine, observe the place where the shaft of the transmission comes into the tub and the weep holes at the housing of the rear bearing. If there is water leaking, the tub seal is at fault.
✅ PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. This part fixes the following symptoms: Leaking | Noisy | Marks left on clothes | Pumps but will not spin.
The part is manufactured from sturdy & durable materialthat prevents cracking, leaking during the installation and use process.
Ensures high durability
Extends used time
Promotes efficiency
WH02X10383 Washer Tub Seal by BlueStars
Perfect Fit, High Quality & Easy To Install
The WH02X10383 Washer Tub Seal is located between the transmission and the outer tub. It’s the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during the filling cycle, or at agitation time, your tub seal may need to be replaced.
Compatible with most top brands (General Electric, Hotpoint) and replaces part numbers: WH02X10032, WH02X1196, WH2X1196, PS4704237.
Premium Quality
The product is made of strong & durable materials that prevents cracking and leaking during the installation and use process.
Saving Solution
Enjoy the great feeling when your washer is repaired and works properly like before - BlueStars brings DIY solutions to help you deal with any trouble.
At BlueStars, we dedicate to making your life uncomplicated, comfortable, and convenient with economical DIY repair solutions for your appliances.
Reliability is what we aim for. We offer you not only high-quality products but also great 24/7 customer services that ensure your satisfaction.
Repair Solutions Purchase With Confidence Promise
BlueStars’ replacement parts are manufactured of high-quality and durable materials free from harmful chemicals. By doing numerously strict tests and reviews performed by our experienced engineers and development team, we commit all products to meet OEM standards and are safe to use.
We also support customers with a coverage on all products and 24/7 customer services which ensure you have a happy shopping experience. All is for us to build a relationship of confidence that you can count on.
Saved myself serious money repairing my top load washer tub seal myself. Took about 1.5hrs to fix.
Eric E.
Verified Buyer
Reviewed in United States on 04/11/2021
Fixed my leaky washer
Was what I needed to fix my older top loading GE Washer, model # WHDSR315DAWW. Make sure you get the spanner wrench for the big nut.
Paul L.
Verified Buyer
Reviewed in United States on 28/10/2021
Good Quality; fits shaft perfectly
Fast delivery and cheaper than local price. Inner dimension fits shaft perfectly; outer diameter was loose on my tub because the old rusty seal had swollen enough to stretch and crack the tub. Loose fit in my case appears to be due to previous rust damage and not incorrect size of new seal as reported by some. I used a heat gun and a hose clamp to bring the mating ring back into shape and added silicone to seal cracks. So far so good.
Robert Tapp
Verified Buyer
Reviewed in United States on 24/10/2021
it came in two days
I repaired a washer with it and it work fine.
Carl Williams
Verified Buyer
Reviewed in United States on 24/07/2021
Great
Fit Perfectly
Amazon Customer
Verified Buyer
Reviewed in United States on 08/06/2021
Great tub seal
Exact like OEM
Patricia Calamuso
Verified Buyer
Reviewed in United States ?? on 05/06/2021
OEM fit for GE top loader
Nice quality. For older washers, you will most likely need to use epoxy (JB clear weld works great) on the outside of the seal where it fits in the tub. The tub plastic warps a little after a while, and won't be perfectly round to fit the seal tightly. I originally used silicone permatex, but it's too flexible...go with the job clear weld
Gabriel
Verified Buyer
Reviewed in United States ?? on 27/12/2020
Worked
didn't fit great but i think it was the washer. used marine silicone and it is holding up well. no leaks
John Herman
Verified Buyer
Reviewed in United States ?? on 14/07/2020
Easy to install
Washer
Dennis L.
Verified Buyer
Reviewed in United States ?? on 30/03/2020
Perfect fit
Arrived early and was a perfect match.
angusmat
Verified Buyer
Reviewed in United States ?? on 07/03/2020
Great replacement
Solid replacement that appeared to be better than OEM
D
Verified Buyer
Reviewed in United States ?? on 10/05/2019
It matches the original
Fit perfectly
Richard Farley
Verified Buyer
Reviewed in United States ?? on 02/05/2019
It works and great customer service
As a non-professional, I wasn't sure exactly how this seal should fit. I thought there was an issue with the seal (turns out it was the tub) and was offered several solutions from the seller (including a replacement and a refund). My tub is a little warped, so I just used some RTV sealant on the outside rim to fill the gap. My washer's been up and running and have no complaints.
Sean M
Verified Buyer
Reviewed in United States ?? on 01/04/2019
If you're already there...
Good peace of mind to replace this while replacing the drum bushing, given the amount of labor involved to get to it. Quality and fit were good.
Amazon Customer
Verified Buyer
Reviewed in United States ?? on 16/02/2019
Great product and decent value
This GE washing machine, tub seal was just like advertised. It arrived before the date given, which was very much appreciated. I would give this Blue Stars company, 5 Stars!
steve rovinsky
Verified Buyer
Reviewed in United States ?? on 13/01/2019
Great prompt service & quality part .
Perfect fit GE top loader washer . Very easy to install .
Juan e.
Verified Buyer
Reviewed in United States ?? on 11/10/2022
Leaked but wasn't a bad seal
The old seal rusted and swelled up which stretched out the plastic part of the tub that the seal sits in. Had to reinstall using a little silicone around the outside of the seal and where it sits against the plastic tub. After about 5 loads its still not leaking so I think we are good!
Steve
Verified Buyer
Reviewed in United States on 09/11/2021
It works but...
Like others, I installed this and it leaked. I reinstalled using sealant/glue around the edges and so far it works well.I used mine on a GE WHSE5240D1WW washer. Watched video on how to... It's actually easy.I also replaced the tub bearing and the bearing on the transmission. It's like having a brand new machine, very quiet now.
Kurt Richard Murray
Verified Buyer
Reviewed in United States on 04/09/2021
Well made, but needs pictorial instruction sheet included.
Well packaged and well made.
Amazon Customer
Verified Buyer
Reviewed in United States on 23/07/2021
Perfect fit
Part fits perfectly and the washer isn't leaking any more, however this was my second time purchasing this seal in 3 yrs. How long are they supposed to last? Is it the quality of this seal or a design flaw by GE?
John B
Verified Buyer
Reviewed in United States ?? on 02/12/2020
Leaked more after installing
The washing machine leaked on spin cycle. Ordered this tub seal based on the fact that it was the replacement for my GE machine. It installed like I would think it would. Not really tight. Put the whole thing back together which is burdensome and tested on a small load setting. Well it leaks more than it did before. I did some research and found out that this seal has issues. The answer is to use silicone to make up for it's issues. Put a seal around the outside ring and a seal around the bottom ring that meats the tub bearing that the seal sits on. Unfortunately, I am still seeing a leak but not quite as bad. So the silicone helped. Looks like a new washer in my future. This one is 9 years old.
RYG
Verified Buyer
Reviewed in United States ?? on 13/09/2020
Tub seal not a snug fit. Had to improvise.
GE Washing Machine GTWN4250M1WS. This tub seal's outer edge was not a snug fit for my washing machine, it fits fine down the middle shift, but not the outside edge, which caused even more leakage. Too solve this, I wrapped the outer edge of the tub seal several times (OK, more than several) with plumber's tape. Wrapped it enough to make it a snug fit and seal. Seems to have worked. I looked into other appliance part websites and even ordered another tub seal that was GE part, but similar and would have had to do the same.
Amazon Customer
Verified Buyer
Reviewed in United States ?? on 24/08/2020
Still leaked after installing
Washing machine still leaked after install
KatMeow
Verified Buyer
Reviewed in United States ?? on 20/11/2019
It's ok
Holding well.
Ty K
Verified Buyer
Reviewed in United States ?? on 05/12/2022
poor seal, still leaks. buy oem instead
The media could not be loaded.
took an hour to take everything apart, cleaned everything perfecrly. installed seal. half hour to put back together. still leaked from the seal. poor quality
gabby
Verified Buyer
Reviewed in United States ?? on 16/10/2022
Dosent work
Did not work. Seemed to fit good when I put it in but started leaking after 2 washes. Took washer apart again and reseated the seal but same problem started leaking again after 2 washes. Got an oem seal and have no issues with the oem seal.
Pnelms
Verified Buyer
Reviewed in United States ?? on 14/09/2022
Part Did Not Work
Package did not properly identify the part number, so I'm not even sure the correct part was shipped. The washing machine leaks worse than it did before, which was expected because it did not fit as snugly as it should have in order to prevent water leakage.
Nicholas Z.
Verified Buyer
Reviewed in United States ?? on 24/08/2022
don't waste your money
sealed fine for 5 washes now leaking again.
Amazon Customer
Verified Buyer
Reviewed in United States ?? on 16/02/2022
just didn't work for me
Leaked just as much after replacing the old one, going to buy another one to see if that will work.
Edgar
Verified Buyer
Reviewed in United States ?? on 05/01/2022
Part did not work. Correct part was ordered.
Well unfortunately this part did not seal properly. After installing and cleaning all mating surfaces this part failed. If anything the washing machine leaked even more after installing this.
jllavine
Verified Buyer
Reviewed in United States on 02/01/2022
Don't do it unless you want to take machine apart a second time
Install was easy no leaks. However after putting the machine back together and running it there was a horrible squeak after some investigation decided it was noise coming from the seal. Took the machine apart a second time after removing seal found it was dry where there should have been some grease. Thankfully another part I replaced came with an OEM GE seal I kept it as a back up, with the proper lubrication. Replaced and no more squeak. I was trying to save $ not worth the savings to have to take the machine apart a second time. If you need to use this my advice is to make sure there is lubrication on the inner seal. I am hoping to get $ back will see what happens.
MomOf2
Verified Buyer
Reviewed in United States on 25/10/2021
Too tight and too small
The outer diameter was too small to fit securely inside the tub, requiring a lot of extra RTV, worse though, the inner diameter was also too small and created excess friction on the shaft. Even after that, it still didn't seal.